LOTRONIC KODA1000 Manual De Uso página 3

Front and Rear panel description
1. Power LED
3. Headphone output
5. Bass button
7. Input selector button (BT/MP3/CD/AUX)
9. Bluetooth LED
11. AUX in jack
13. Right channel speaker output
15. Power cable
Operating instructions
Prior to switching the system on, please make all connections properly according to
the below chart.
Please pay particular attention to the polarity. Turn all volume controls down to the
minimum.
Turn the input selector switch to the correct position and power the unit on. A few
seconds later, the unit has reached normal working condition. Adjust the volume
according to your taste.
If the fuse blows, please contact a technician to replace the fuse by a new one that is
identical to the original one.
If the LED doesn't light up when the amplifier is switched on, it means that there is a
malfunction. Please turn the power immediately off and solve the problem. Turn
power on again.
©Copyright LOTRONIC 2013
2. Power switch
4. Treble button
6. Volume button
8. MP3 in jack
10. NFC (Near Field Communication)
12. CD in jack
14. Left channel speaker output
4