LOTRONIC KODA1000 Manual De Uso página 5

Distortion • The volume is too loud
• Incomplete speaker connection
Sound
• Incomplete input/output lead
only from
one
• Left/right balance is off on one
channel
Specifications
Output power (RMS) ........................................................... 2 x 25W @ 8 Ohms
............................................................................................ 2 x 30W @ 4 Ohms
THD .......................................................................................... <2% (30-20kHz)
Frequency response ..................................................................... 30Hz – 20kHz
Signal to noise ratio .......................................................... >77dB (A-weighted)
Rated input level/impedance................................................................. 500mV
Rated load impedance .......................................................................... 4 Ohms
Power consumption ................................................................................. <80W
Power supply ................................................................ 220-240Vac ∼ 50/60Hz
Dimensions .......................................................................... 244 x 202 x 67mm
Net weight ............................................................................................... 2,9 kg
Notes:
1. The above specifications are only for reference
2. Design and specifications are subject to change for improvement without prior
notice
Accessories:
1x user manual
1x 3.5mm mini jack to 3.5mm mini jack lead (20cm)
©Copyright LOTRONIC 2013
the correct position
connections
side
• Select the correct speaker
output
•
Reduce the volume to an
acceptable level
• Connect securely
• Connect securely
• Adjust the balance properly
6