Led Indicator - Anker PowerConf S330 Manual Del Usuario

At a Glance
1 2
Volume down button
1
Mute button
2
3 Phone call button
Volume up button
4
Connecting
Connect PowerConf S330 to your PC via the USB-C cable.
01 EN
3 4
• The PowerConf speakerphone will automatically power on once connected to
your PC via the USB-C cable.
• Once the speakerphone is connected and powered on, all buttons will flash
white for 2 seconds and then stay solid white.
• Make sure the output from your PC's USB port to the speakerphone is more
than 5 V / 2 A, otherwise the speakerphone cannot work normally.
• DO NOT connect this device to your smartphone.
Using Your PowerConf
Press once
Press and hold for 2 seconds
Press or press and hold
Press once
Make, answer, reject, or end a call only with certified software.

LED Indicator

Make a call
Incoming call
Answer / End a call
Reject a call
Volume up / down
Mute on
Mute off
There is an LED indicator when you make, answer, reject, or end a call, only with
certified software.
Answer / End a call
Reject a call
Volume up / down
Mute or restore the microphone
Flashing green
Flashing green
Solid green for 1 second, then solid white
Solid green for 1 second, then solid white
Flashing white
Solid red
Solid white
EN 02