Charging The Battery - LOTRONIC LTC MIRROR-PHONE Manual De Uso

BLUETOOTH SPEAKER WITH MIRROR & PHONE HOLDER
In accordance with the requirements of CE standard
CONTENTS
•
1 x Mirror Speaker,
•
1 x User Manual,
•
1 x Charging Cable
•
1 x Aux Cable
DESCRIPTION OF THE BUTTONS AND CONNECTORS
1. On / Off / Handsfree / Mode Button
2. Previous song/decrease volume
3.
Next song / increase volume
4. LED illumination
5. AUX
6. Battery charging port
7.
Micro SD card input
8. USB input

CHARGING THE BATTERY

Use the charging cable included with the
product. Plug the micro USB connector
into the 5V input (6) on the rear panel of the mirror and insert the other USB connector into a PC,
Laptop or 5V power adapter. The red LED indicator will light up. This indicator will turn off when
the battery is fully charged .
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but
deposed correctly in accordance with your local regulations. Batteries shall not be exposed to
excessive heat such as sunshine, fire or the like. When the internal batteries are not to be
used, remove them to avoid damage caused by battery leakage or corrosion.
IMPORTANT NOTE : APPLIANCES CONTAINING LITHIUM-ION BATTERIES
1. PRIOR to using the unit for the first time, please charge fully the battery
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely, otherwise it will lose 20% of its capa-
city or even be totally damaged! If the voltage becomes too low, the internal circuits are not
powered anymore and it will become impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of
its capacity and check/charge it once per month.
The life time of the battery depends on the observance of these recommendations.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
We cannot be held responsible for damaged batteries further to the non-observance of
ON / OFF / HANDSFREE / MODE BUTTON (1)
Press and hold this button for a few seconds. A voice will indicate that the speaker has been
turned on. Press and hold the button again to turn it off.
Activate the Bluetooth function on the mobile device and select "MIRROR-PHONE" in the list of
found devices. The Mirror-Phone will connect to your device.
2
ENGLISH
OPERATING INSTRUCTIONS
1 2 3 4
these basic rules.
Code: 10-5582
5 6 7 8