Intended Use - SNOWJOE SUNJOE 24V-MDTCR1-LTW Manual Del Operador

Operation
m
WARNING!
Do not use any attachments or accessories
not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in product damage.
m
WARNING!
Do not modify or attempt to repair the
metal detector except indicated in the instructions for use and
care.

Intended Use

This metal detector is intended for locating buried metal
objects. When searching for metals underground or on the
surface, this device helps you to:
1. Rule out signals caused by ground minerals.
2. Rule out signals caused by metal objects that are not of
the selected DISC mode.
3. Identifying buried metal objects.
4. Estimating the depth of objects.
m
WARNING!
This device is not intended for use in
commercial or industrial applications.
Control Panel and LCD Screen (Fig. 11)
The display shows the PROBABLE identification of the metal
detected, as well as its PROBABLE depth.
Fig. 11
A
B
C
D
E
F
A. Target Identification – The target identification system
consists of the target category bar, the target-ID icons,
the arrows and the frames below. When metal objects are
detected, a Target-ID icon will illuminate with an arrow
below pointing to it.
Target category bar
Iron Gold
range range
Target-ID icons
Icon
(some gold and bronze)
NOTE: Due to a variety of environmental factors the induced
electromagnetic field of metallic objects may vary greatly
affecting the accuracy of the readings. These include but are
not limited to:
M
• Soil depth
L
• Ground minerals
K
• Soil composition
J
I
• Object size and angle
H
• Object oxidation and purity
G
• Object surface texture
• Electromagnetic Interference
B. Sensitivity Level Indicator – Indicates the detection
sensitivity. The more bars, the higher the sensitivity.
C. Battery Level Indicator – Indicate remaining battery
power. Refer to the table below for the battery percentage
for each interface.
25%
NOTE: The battery must be recharged when the power
drops to 25% or less.
10
Silver
range
Metals
Iron and
ferrous metals
Aluminum and
other alloys
Gold and bronze
Zinc and copper
Silver and copper
Silver and copper
Silver and copper
50% 75%
US Coin
Nickel
(5 cents)
Penny
(1 cent)
Dime
(10 cent)
Quarter
(25 cents)
Half dollar
(50 cents)
100%