SOUNDMASTER RCD1755 Manual De Instrucciones página 11

MANUAL FM FREQUENCY SEARCH
Press "TUNE UP +" or "TUNE DN –" to adjust the frequency in 50 kHz
steps. Use this method to tune to weak or distant stations that are not
strong enough to be recognized by the automatic searching.
Press and hold "TUNE UP +" or "TUNE DN –" until the frequency on the display begins to
change and then release the button to automatically search for the next available station.
TO STORE A STATION AS A PRESET
1. Tune to a frequency and then press "PROG/+10"
button.
2. Select the station number with "TUNE UP +" or
"TUNE DN -".
3. Display will show "P01" and then press "PROG/+10" button to preset channel number
You can also store desired radio station directly to preset station buttons "1 – 5".
To do this, select the desired radio station. Press and hold the corresponding station button
pressed until "P#" appears on the display and confirm with "PROG/+10".
RECALL PRESET RADIO STATIONS
To recall preset radio stations, press the "PRESET" button repeatedly until the desired preset
number is shown on the display or press a preset station button "1 – 5".
Press the "FUNCTION" button repeatedly until CD mode is selected.
START CD PLAYBACK
➢ Press the " "button to open the disc compartment door.
➢ "OP" shows on the display.
➢ Load an audio CD or MP3-CD on to CD tray.
➢ Press the CD door at the edge to close the disc compartment door. The unit should read the
disc information and show the total number of tracks.
TO OPERATE THE PLAYBACK
➢ Press "
/ SCAN" to start playback
➢ During playback, press "
➢ Press " " or "
skip next 10 tracks while playback.
➢ Press and hold "
Release the button to resume to playback at normal speed.
➢ Press " " to stop the playback
/ SCAN" to pause it. Press again to resume.
" to skip to the previous or next track. Press the "PROG/+10" button to
" or " " to search backward or forward within the same track.
RCD1755 / English Instruction Manual
CD
3