Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Stroke per min.:
3000
Metal cutting ability: max. 1.5 mm
Air inlet:
1/4"
Working pressure: 6,3 bar
Air consumption: 120 l/min
Vibration:
3.8 m/s²
Noise level:
LpA=97 dB(A)
LwA=108 dB(A)
Length:
235 mm
Weight:
1 Kg
GENERAL
The air nibbler is made by high quality and will work a long time, if you follow the instructions in the
manual. The Nibbler is suitable for all types of sheet made of steel, aluminum, copper and brass and
other non-metallic materials up to 1.5 mm. It is ideal for sheet metal work in the automotive sector and
can be used in small places without failure. The nibbler cuts precisely, safely and easily narrowest
radii.
SAFETY
Keep hands away from moving parts of the device, failure to comply can lead to serious injury.
When working with the tool always wear TÜV-approved safety glasses with a side shields and
gloves.
Only use compressed air with maximum pressure value of the tool.
Use only air suitable accessories. Risk of injury.
Make sure that other people keep a safe distance while you use the tool.
Make sure of hoses on the floor or work surface.
Do not align the air outlet of the tool at yourself or others people.
Do not work in potentially hazardous environments.
Test the tool before use
Disconnect the tool from air supply before make any maintenance or changing accessories.
Disconnect the tool after completed work from the air supply.
Always use only original spare parts
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Air – Nibbler
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Art. 3237
Publicidad
