Safety Labels On The Scanner - Ivoclar digital PrograScan PS3 Instrucciones De Uso

About this Document
Hazard example:
DANGER! Residual energies may still be stored in the scanner,
which may be unexpectedly released during maintenance.
Death or severe personal injury due to electric shock.
f Ensure that work is carried out only by qualified personnel and
avoid any method of operation that could impair the safety of
the scanner.
f Ensure that unauthorised persons cannot perform any work on
the scanner.
Additional informationen
Symbol
1.2

Safety labels on the scanner

Safety labels indicating possible dangers/residual dangers are
mounted on the scanner. The safety labels on the scanner must be
followed under all circumstances. If they become faded or damaged
during the scanner's lifetime they must be replaced immediately.
Their readability and completeness must be checked at regular
intervals. The moment the labels are not immediately recognizable
and understandable at first glance, the optical 3D scanner must be
taken out of operation until new labels have been attached.
The pictograms for warnings, prohibitions and commands on the
scanner and their meanings:
Symbol
6
Significance
Additional information, e.g. for better understanding,
for simplifying workflows or for further information
Significance
Danger of crushing.
This pictogram is located in the area of the swivel arm
and is designed to warn of a possible crushing hazard
between scanner and swivel arm.