Repair / Troubleshooting - Ivoclar digital PrograScan PS3 Instrucciones De Uso

f Stop the optical 3D scanner and disconnect it from the power
supply for the duration of the cleaning.
f Vacuum or wipe the scanner with a dry cloth.
f Irrespective of general cleaning activities, carry out the following
cleaning operations at the specified intervals:
Interval
weekly
7.3

Repair / Troubleshooting

DANGER! Residual energies may still be stored in the scanner,
which may be unexpectedly released during maintenance.
Death or severe personal injury due to electric shock.
f Ensure that work is carried out only by Ivoclar service personnel
and avoid any method of operation that could impair the safety
of the scanner.
f Ensure that unauthorized persons cannot perform any work on
the scanner.
The optical 3D scanner contains sensitive electrical components and
sensors. Repairs may therefore only be carried out by Ivoclar service
personnel.
In case of a malfunction that cannot be resolved by restarting the
scanner or workstation, contact your customer support (see chapter
"Customer support", page 7).
Cleaning and Maintenance Work for the User
Cleaning task
Dust/vacuum operating elements
Sweep floor around scanner
Dust electrical equipment (computer, connection panel,
cables, operating elements, etc.)
25