Function Description - Wilfa UNI Manual De Instrucciones

FUNCTION DESCRIPTION

HEAT RESISTANT SILICON PAD
Sudden rise in temperature might affect the accuracy of the scale. We therefore
recommend using the heat resistant silicon pad for optimum accuracy during
brewing and measurements of hot liquid.
The pad is also intended to be used to protect the scale during measurements
and as a support when measuring directly into a portafilter.
FULL DISPLAY LAYOUT
TURN ON SCALE
• Make sure the power switch on the back is set to on position.
• Then short press the power button on the display to turn the scale on.
• The timer and scale button fades in, and the scale is ready to use.
TARE FUNCTION
• The scale tares automatically when it starts.
• Place the coffee container on top of the scale, press the scale button to tare
the weight of the container, and the scale will show 0.0g/oz. The scale is now
ready to measure any additional weight.
• Remember to use the heat resistant silicon pad if you are brewing or
weighing any hot liquids.
CHANGE WEIGHT UNIT
Long press the scale button for 3 seconds to switch between grams (g) and
ounces (oz).
TIMER
• The timer does not show when starting the scale. Short press the clock-
button to show the timer.
• Short press the clock-button again to start the timer. To pause the timer,
short press the clock-button and the time will freeze.
• To reset the timer long press the button for 1 second.
AUTO OFF
If you stop adding weight to the scale, it will automatically shut off after 10
minutes.
PRECISION SCALE · KS1B-T2
7
EN