Maintenance; Disposal And Recycling - Dexter 12VBA2-20.5 Instrucciones Legales Y De Seguridad

7. MAINTENANCE

FR
BATTERIES
ES
These batteries have been designed to provide maximum trouble-freelife. However, like all
batteries, they will eventually wear out. Do not disassemble battery pack and attempt to
PT
replace the batteries. Handling of these batteries, especially when wearing rings and
jewelry, could result in a serious burn. To obtain the longest possible battery life, we suggest
IT
the following:
·Remove the battery pack from the charger once it is fully charged and ready for use.
EL
CLEANING
Unplug before any cleaning work. Keep this battery pack free of debris and dirt. Wipe down
PL
the equipment with a cloth and/or compressed air. It is highly suggested that you clean the
device after every use.
UA
STORAGE
RO
After charging, the battery pack may be stored in the charger, as long as the charger is not
plugged in.
EN
Do not store the battery pack on the tool. The lowest temperature allowed for storage
is -20°C (-4°F).
Store the battery in a clean, dry place. Cover it in order to provide added protection.
When battery pack is not in use, keep it away from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another.
For battery pack storage longer than 30 days or in winter:
·Store the battery pack where the temperature is below 45°C (113°F) and away from
moisture. Store battery packs in a 25%-50% charged condition.
·Every six months of storage, charge the pack as normal.
·Keep dry.
damaged.

8. DISPOSAL AND RECYCLING

DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the battery pack properly.
This battery pack contains Li-ion batteries. Consult your local waste authority for
information regarding available recycling and/or disposal options. Discharge your
battery pack by operating your tool, then remove the battery pack from the tool
housing and cover the battery pack connections with heavy-duty adhesive tape to
prevent short circuit and energy discharge. Do not attempt to open or remove any of
the components.
87