BUTURE BR600 Manual Del Usuario página 8

Overload/Discharge Fuse
Working Temperature
Backflow Protection
Short circuit fuse protection
Reverse polarity protection
Operation
Power indicator light
Press the power button to check the capacity of the Jump starter.Indi-
cator Lights as below picture(25%,50%,75%,100%)
Recharge the Jump starter
NOTE: The wall charger or car charger is not included in the
package, you can use a universal USB charger to recharge the unit,
such as your phone or pad charger(2A above is suggested)
At Home:
1.Plug the USB cable into any USB wall adaptor (5V 2A above, not
included)
2.Connect the UCB C cable（included） to the unit
In Car:
1.Plug the USB car adapter(not included)into an available 12v socket
2.Connect the USB C (included ) to the unit.
Note: It is recommended to recharge the Jump starter every
3-4months to maintain the efficiency and prolong the service life of
the internal battery even if the unit has not been used.
≤13V±0.3V
-20℃~60℃ / -4℉~140℉
≥12.6V±0.3V
√
√
EN 05