Reli On CONFIRM Manual Del Usuario página 14

Step 2:
Press the Up Arrow and Down Arrow buttons
at the same time for 5 seconds. A beep sounds and the
meter turns on. Next, a second beep sounds and "SET"
shows on the screen.
Step 3:
Use the Up Arrow to change the set-up screen. When you press
the Up Arrow, the set-up screen changes in the order shown in the dia-
gram on the following page. Press the Down Arrow button to change a
setting within a set-up screen menu.
Note:
If you need to go back to a setting, you must scroll through each set-
up option. You cannot go backwards in set-up mode.
In set-up mode, the meter will turn off automatically after 3 minutes of non-
use.
14
All manuals and user guides at all-guides.com