Barrette 34111490 Instrucciones De Instalación página 4

4.
Components Needed
Side Rails "B"
Side Rails "C"
a. Install side rails "B" (from End To Corner) (Fig. 7).
b. Install side rails "C" (from Corner to Corner) (Fig. 7).
c. Ensure lock tabs are inside post (Figs. 8 & 9).
TIP: Work your way around from End to
5.
Components Needed
Side Rails "A"
a. Install side rails "A" (from End to Corner, Corner
to Corner, and Corner To End Post) (Fig. 10).
b. Ensure lock tabs are inside post (Figs. 11 & 12).
TIP: If side rails "A" or "B" ever need to
be removed, carefully insert a flat head
screwdriver to push locking tab down to
remove rail from post.
6.
Level posts and complete installation
Tools / Materials Needed
Level
Tape Measure
(4) Post Tops
Concrete
a. Make sure diagonal is 62
Adjust as needed (Fig. 13).
b. Put dry concrete into post holes (up to 80 lbs. per
post), tamping down every 3-4" of mix added.
c. Install post tops. Apply glue on inside rim of post
tops then attach to posts (Fig. 14).
4
Qty.
10
5
Corner ("B"), Corner to Corner ("C"), and
Corner to End ("B").
Corner Post
Fig. 8
"C"
"B"
Qty.
3
Corner Post Fig. 11
"A"
"A"
⁄
3
Fig. 9
"B"
End Post
Fig. 12
"A"
End Post
" and posts are level.
4
Side Rails
"B"
Corner
Posts
End
Posts
Side Rails
Side Rails
"A"
Corner
Posts
End
Posts
40 ⁄ "
1
2
On Center
62 ⁄ "
3
4
Fig. 7
"C"
Fig. 10
Fig. 13
36 ⁄ "
1
2
40 ⁄ "
1
2
On
Center
Fig. 14