Device Overview / Included In Delivery; Charging The Spots; Changing The Battery In The Remote Control - Glatz OSYRION Spot Instrucciones De Montaje Y Uso

Device overview / Included in delivery

1 × Instruction manual
1 × 2-way USB charger (2 ×*)
2 × USB-C cable (4 ×*)
58 mm
- TEAKWOOD
- CASTELLO Pro
®
- AMBIENTE Nova
- AURA
51 mm
- ALU-SMART
- ALU-TWIST
- PIAZZINO
- SUNGWING Casa
®
- FORTINO Riviera
®
- FORTANO
®
- SOMBRANO S+
®
- FORTERO
®
- FORTELLO LED
®
26
*
Set of 4
2 × Adapter plate (4 ×*)
Magnet
On/off switch
USB-C charging port
2 × LED light (4 ×*)
1 × Remote control
8 × Rubber bands (16 ×*)
39 mm
- ALEXO
®
- PENDALEX P+
®
27

Charging the spots

• Use the supplied USB charger or a commercially available USB char-
ger to charge the OSYRION Spot.
• If smoke appears, switch off the unit immediately and pull out the plug.
• In case of abnormal noises, smells, overheating, smoke or leaking
liquid, switch off the spot immediately, disconnect the mains plug,
remove the spot from the charger and bring it into the open air.
1
1.2
1.1
loading
full

Changing the battery in the remote control

• Always keep batteries out of the reach of children. If a battery is swal-
lowed, a doctor should be consulted immediately.
• Incorrect usage creates a risk of explosion.
• Always wrap batteries during storage or disposal to avoid discharge,
ignition or damage.
• Always dispose of batteries properly in accordance with applicable laws.
1
2
CR 2032
1. Connecting the charger
2. Plug in the charger
!
Connect the mains plug of the
charger to a suitable socket. The
mains voltage must correspond to
the value on the rating plate.
Open cover
!
Unlock cover carefully.
!
Remove foil before first use
Replace battery, Close cover
!
Use battery type CR 2032 and
ensure correct polarity!