Cleaning & Maintenance - bombol Stay Sparky Bamboo 3Dknit Manual Del Usuario

EN
IMPORTANT ! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
FALL Hazard: Babies have suffered skull fractures falling while in and from bouncers.
•Use bouncer ONLY on floor.
It is dangerous to use the bouncer on elevated surface, e.g. table.
•NEVER lift or carry baby in the bouncer.
SUFFOCATION Hazard: Babies have suffocated
when bouncers tipped over on soft surfaces.
•NEVER use on a bed, sofa, cushion, or other soft surface.
•NEVER leave the child unattended.
To prevent falls and suffocation:
•ALWAYS use the restraint system. Adjust to fit snugly, even if baby falls asleep.
•STOP using the Bamboo 3Dknit™ as a bouncer when baby starts trying
to sit up or has reached 20lb/9kg, whichever comes first.
•Do not use the bouncer once your child can sit unaided.
•Do not use the product if some of its parts are damaged, broken, torn or missing.
•Do not use accessories or spare parts not approved by the manufacturer.
•Make sure that an older child is not allowed to rock the baby too forcefully.
•This bouncer is not intended for prolonged periods of sleeping.
•This bouncer does not replace a cot or a bed. Should your child need to sleep,
then he or she should be placed in a suitable cot or bed.
Fig.1. Assembly
Fig.1.1. Insert the crossbar in the slots of the curved
side frames. Screw the components together with the
provided L-shape key.
Fig. 1 .2. Attach the seat to the base frame. The 2 locking
mechanisms on the sides will engage with a "CLICK".
Fix the safety harness to the seat using the button.
Fig.2. Backrest regulations
A cordlock is located behind the backrest. Pull or push
the cordlock to change the angle of the backrest so to
have a more active position (fig. 2. 1 ), a neutral position
(fig. 2.2) or a more relaxed position (fig. 2.3).
Fig.3. Disassemble and storage
Fig.3. 1 . Release the locking mechanism by pushing
together the buttons behind the seat.
Fig.3.2. Slide up the seat away from the base frame.
Fig.3.3. Store away the seat and the base frame.
Cleaning & Maintenance
Wash seperately. Remove the rigid inserts before
washing. Prolonged and continuous exposure to bright
sunlight may give rise to colour changes of various
materials. Store this product in a dry place.
Keep the lock mechanisms and plastic fasterners clean
and free of dust and sand.
Check the structure and attachments for evidence of
deterioration and replace when required in accordance
with the manufacturer's instructions.
Do not iron. Do not dry clean. Do not spin dry.
8
WARNING
!
Bamboo 3Dknit™ may be used both as
a bouncer and a comfy lounge chair.
Use the correct configuration (S, M or L) according to
your childs weight and abilities.
S - NewBorn Bouncer configuration (p.4)
Use only for new borns and small children unable
to sit unaided and up to 9 kg EN 1 2790:2009 /20 lb
ASTM F2 167-19.
Fix the seat on the front fasteners: they will engage
with a "CLICK". Adjust the safety harness side buttons
according to the size of the child by using the 3 regulation
slots. Attach the safety harness to the side buttons.
M - Bouncer configuration (p.5)
Use only for small children unable to sit unaided and
up to 9 kg EN 1 2790:2009.
Fix the seat on the back fasteners: they will engage
with a "CLICK". Adjust the safety harness side buttons
according to the size of the child by using the 3 regulation
slots. Attach the safety harness to the side buttons.
L - Lounge chair configuration (p.6)
Use only for children able to walk and sit on their own
and up to 100 kg EN 1 728:201 2 /1 53 lb ASTM F26 1 3-16.
Remove the safety harness by detaching the buttons
on the side and on the seat. Flat fold the side protection
pieces on the seat. Fix the seat on the back fasteners: they will
engage with a "CLICK". Remove the safety harness.
USER GUIDE