Code 3 XCEL Instrucciones De Instalación Y Operación página 6

Dip Switch 1
Dip Switch 2
Dip Switch 3
Dip Switch 4
Dip Switch 5
Dip Switch 6
Dip Switch 7
Dip Switch 8
Dip Switch 9
Dip Switch 12
Dip 10 + Dip 11
Dip 10 + Dip 11
Note: If any Dip Switches are modified while powered on, Power must be reset to entire unit for Dip Switch setting to take effect
Connection of a 58 watt speaker to the siren amplifier will
cause the speaker to burn out, and will void the speaker
warranty!
Amplifier Power Distribution
The Level 1, 2, 3A and 3B outputs can supply a maximum of 15 Amps each or a combined total of 50 Amps. Each Level has a 20 Amp fuse
installed inside the Amplifier. Fuses may be accessed through the panel on top of the Amplifier.
The Auxiliary outputs A, B, C, D, E, and F can supply a maximum of 10 amps each or a combined total of 60A. Auxiliary outputs A, B, C, D,
E, and F have 15 amp fuses. Fuses may be accessed through the panel on top of the Amplifier.
Any electronic device may create or be affected by
electromagnetic interference. After installation of any
electronic device, operate all equipment simultaneously to
insure that operation is free of interference.
Replacement Parts: CZZ3SMIC replacement microphone for remote XCEL siren
Configurable Features for Models with 6 buttons for light control
Dip Switch UP
California Title 13 ON
Hands Free w/ Level 3 Lighting ON
Hands Free ON
Siren Lock ON
No Function
Scroll has "OFF" step
Hit-N-Go
Horn Ring Transfer Level 3 Only
No Function
Alt. Tone set as Hyper-Yelp
Dip 10 UP, Dip 11 UP, 3 Level Switch is Progressive
Dip 10 UP, Dip 11 DOWN, 3 Level Switch is Indepenent
Dip Switch DOWN
California Title 13 OFF
Hands Free w/ Level 3 Lighting OFF
Hands Free OFF
Siren Lock OFF
Scroll does not have "OFF' step
Horn Ring Transfer in Level 2 & 3
Alt. Tone set as Hi-Lo
Dip 10 DOWN, Dip 11 DOWN, 3 Level Switch is Progressive
Dip 10 DOWN, Dip 11 UP, 3 Level Switch is Semi-Progressive
Utilizing non-factory specified screws and/or mounting
brackets and/or the improper number of screws may result
in failure of the mounting system and severe damage to the
vehicle as well as loss of warranty coverage on the equipment.
No Function
Scroll
No Function
Page 6 of 10