Haier LE26A300 Manual De Usuario página 16

Operation
Restore Factory Default: To restore to the factory
default.
Lock Menu
Parental Control can be used to block specific channels,
ratings and other viewing soure.
A
Press MENU button and then use
selcet Lock menu.
B
Press /OK button and then press digits button to
input the digits( The initial password is 0000) . The
menu will display as follows:
Set Password
Press OK to enter the submenu , press digits button to
input the number of 0-9 twice in the New Password and
Confirm Password. Then you can change the password
when you input the same number twice.
Block Program
Press OK button to enter the submenu, then press
/ button to select a channel you want to blocked,
press the OK button on the remote control the channel
will blocked, press the OK button again to cancel.
EN-16 TV LED-TFT Owner's Manual
All manuals and user guides at all-guides.com
/ button to
Parental Guidance
Press /OK button to selcet Parental Guidance. Press
/ button to select Off or 10-18 to limit the age of
children who will watch TV.
Clear Lock
Press /OK buttonto selcet Clear Lock , all lock options
wil be cleared.
PC Set
The TV can be used as a display, and you may adjust
relevant settings. Press INPUT to switch the signal input
to PC mode.
A
Press MENU button to display the screen main
menu, press / to select the Picture menu.
B
Press /OK button and then use
select Adjust.
C
Press /OK button to select the Adjust menu as
shown in the below figure.
D
Press / button to select the option to be
adjusted and Press /
Auto Adjust: This is used to reset the default setting
parameters (After the operation, Auto Adjusting will be
display on the screen).
Horizontal Pos. : Horizontal position of picture can be
adjusted in this item.
Vertical Pos.: Vertical position of picture can be
adjusted in this item.
Clock: This is used for adjusting H Position and V
Position as well as relative parameters in PC modes.
/ button to
to adjust it.