All manuals and user guides at all-guides.com
822_949_330 KAM200.book Seite 16 Donnerstag, 17. Januar 2008 9:49 21
g
0 Finally press button
2/B).
The red indicator will come on.
The brewing procedure will start.
As long as the red indicator next to
3
button
(Bild 2/B) is on, only the
button
will work.
4.2 Making coffee by pre-pro-
gramming the start time („Auto"
function)
0 Pour in water (Item 1.2).
0 Swing out swivel filter (Figure 1/B).
0 Insert filter paper (Item 1.3).
0 Add ground coffee (Figure 12).
0 Swing swivel filter back.
0 Place coffee jug on the warming plate
(Item 1.4).
Programming the „Auto" function:
0 Press button
PROG
The green lamp next to the
button
(Figure 2/F) flashes.
AUTO
0 Set the desired start time with the
buttons
(Figure 2/E) and
H
(Figure 2/J). The start time must be set
whilst the green lamp is flashing.
If the green lamp has already ceased to
3
flash before the settings are com-
pleted, press button
again and continue with the program-
ming.
The green lamp ceases to flash ca.
3 seconds after the last button actua-
tion. This indicates that the settings are
saved. The display once again shows
the time and the settings in normal
mode.
0 Press button
AUTO
The green indicator for button
will come on. The brewing procedure
will start automatically at the set time.
At the start time, the green indicator
(Figure 2/F) will go out and the red in-
dicator next to the button
(Figure 2/B) will be illuminated.
16
As long as the red indicator next to
3
(Figure
button
button
3
If, once pre-programmed, the start
time is not to be changed you need
only press the
vate the „Auto" function.
5
Coffee using the coffee
grinder
3
You can prepare coffee with beans
either immediately („Normal mode"), or
by pre-programming the start time
(„Auto" function.
3
For preparing coffee with beans you
must set number of cups, coffee
strength and where required the
aroma setting.
Number of cups
(Figure 2/K).
Button
ting how many cups are to be pre-
pared. The grinder will grind the
appropriate amount of coffee beans.
MIN
The number of cups is indicated next
to the symbol
can be set.
Coffee strength
Button
(Figure 2/F)
AUTO
ting the coffee strength.
The symbols for coffee strength have
the following significance:
Aroma setting
The aroma setting guarantees full cof-
(Figure 2/F).
fee enjoyment even with small quanti-
ties (2-4 cups). If the aroma setting is
AUTO
selected, the symbol
3
The aroma setting can only be selected,
if
button
than 4 cups are set, the aroma setting
cannot be selected.
(Bild 2/B) is on, only the
will work.
button to acti-
AUTO
(Figure 2/G) is for set-
2-10
. 2, 4, 6, 8 or 10 cups
(Figure 2/D) is for set-
weak coffee
medium coffee
strong coffee
lights.
or
cups are set with the
(Figure 2/G). If more
2-10