General Instructions - Resol SBS 1000 Guía De Conexión Y Operación

SBS 1000
• Flushing, venting and filling in one operation
• For commissioning, pressure test and mainte-
nance of solar thermal systems
Solar thermal systems are usually filled with water or water-
glycol-mixtures as the heat transfer fluid. The filling and
flushing station allows quick and clean filling of solar thermal
systems with the heat transfer fluid.
Technical data
Dimensions (H x W x D): 1000 x 430 x 470 mm
Weight (unfilled): 20 kg
Tank: 30 liters, PE, with suction strainer and check valve
Delivery flow: 5 ... 47 l/min
Delivery height: 52 m
Pump power: 230 V, 1 kW
Isolating ball valves : 3/4" union nut
Check valve: 3/4"
Drain valve: 1/2"
Medium: Water or glycol mixtures
Medium temperature: max. 60 °C

1. General instructions

The flushing and filling station SBS 1000 is appropriate for
water and water-glycol mixtures only. The medium must not
contain any abrasive substances, but may be polluted.
The user must be sure that the SBS 1000 is appropriate for
the medium used.
All manuals and user guides at all-guides.com
The filling and flushing station includes:
• Stainless steel trolley with robust tyred wheels, pump
protection and hose holder
• Robust, powerful and silent pump with separate on and
off switch
• 30-litre-polyethylene tank with suction strainer, check
valve, return turbulence reducer and drain valve
• Large filling hole with sealing cap
• Pressure-resistant, transparent flow and return hoses
for easy visual checking
• Connection hoses with isolating ball valves for preventing
the medium from leaking from the hose and for adjusting
the delivery rate
Warning: Danger of life!
It is forbidden to use petrol, solvants or other
explosive substances with a flaming point
below 55 °C.
Attention: Damage to property!
Do not flush or fill the solar thermal system
during periods of strong sunshine.
B
11
|