Rear Panel - Cudy GS1006P Manual Del Usuario

Rear Panel

The rear panel of the PoE Switch indicates an DC inlet power socket and grounding column.
Grounding column
The Grounding column is on the left side of the power supply interface. Please use wire grounding to
prevent lightning strike.
Installation the Switch
This part describes how to install your Ethernet Switch and make connections to it. Please follow the
following instructions in avoid of incorrect installation causing device damage and security threat.
 Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet
cloth or liquid;
 Do not place the switch near water or any damp area. Prevent water or moisture from entering the switch
chassis;
 Do not place the switch on an unstable case or desk. The switch might be damaged severely in case of a
fall;
 Ensure proper ventilation of the equipment room and keep the ventilation vents of the switch free of
obstruction;
 Make sure that the operating voltage is the same one labeled on the switch;
 Do not open the chassis while the switch is operating or when electrical hazards are present to avoid
electrical shocks.
All manuals and user guides at all-guides.com
- 3 -