How To Use By Remote I/0; How To Use In Serial Mode - Agilent TwisTorr 305 FS Manual Del Usuario

Technical Information

How to Use by Remote I/0

1
Power ON the controller
2
Press the "COUNTERS" and "MEASURES" button together.
3
Select MODE = REMOTE from the "INPUT/OUTPUT" menu
4
Exit from configuration menu
5
Connection example:

How to Use in Serial Mode

1
Power on the controller
2
Connect the serial cable
3
Select by front panel if you want to work in 232 or 485, and if necessary, the
serial address.
4
Select SERIAL from the INPUT/OUTPUT menu
5
Open the A-Plus software (see orderable parts table)
6
Ready to operate by SERIAL connections.
Agilent TwisTorr 305 FS Remote Controller User Manual 243