Tripp-Lite B021-000-19 Manual Del Usuario página 3

Installation
Refer to the example installation diagram below as you perform the following steps:
1
Plug the cable kit (provided with this unit) into the console port on the B021-000-19.
2 Plug the keyboard, monitor, and mouse connectors on the other end of the cable kit into their respective
ports on the server or KVM.
3
Connect the power cord to the B021-000-19's power socket and plug the other end into a compatible AC
power source.
4
Power up the connected server or KVM.
5 Turn on the B021-000-19 LCD screen by pressing the On/Off button (located just below the left side of the
LCD monitor).
Note: The example diagram below shows the B021-000-19 connecting to a B022-016 KVM switch. If you are
connecting to a different model, the console port connectors may be in a different location.
LCD OSD (On-Screen Display) Configuration
Note: Once the B021-000-19 console has been
connected to a powered-on server or KVM switch
and turned on, the console and LCD monitor will go
into sleep mode automatically when the console
cover is closed. When the unit is in sleep mode,
raising the console cover will automatically restart
the console and LCD monitor. To turn off the
monitor, press the On/Off switch.
The LCD OSD allows you to set up and configure
the 19-inch LCD monitor:
• To bring up the LCD OSD main menu, press the
MENU button.
• Use the < or > buttons to navigate through the
settings.
• After navigating to a setting choice, use the
MENU button to bring up the adjustment screen.
• When making adjustments, > increases the value;
< decreases the value.
• When you are satisfied with your adjustment,
press the AUTO button to make the change and
return to the previous screen.
• When all of your adjustments have been made,
press the AUTO button to close the LCD OSD.
All manuals and user guides at all-guides.com
2
3
3
1
LCD OSD Function Diagram