Important Safety Precautions; Tools & Materials Required - Hinkley HOVER Manual Del Usuario

IMPORTANT SAFETY PRECAUTIONS

WARNINGS:
• Disconnect power by removing fuse or turning off circuit breaker before installing the fan and/or optional lighting.
• Support directly from building structure.
• To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked "acceptable for fan support" and use
screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable f
support and may need to be replaced. Consult a qualified electrician if in doubt.
• Do not use an incandescent light dimmer. Do not use this fan with any transformer type fan speed control device.
• To reduce the risk of personal injury, do not bend the blade arms when installing them, balancing the blades or cleaning the
Do not insert any object(s) between rotating fan blades.
The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible conditions
and situations that may occur. It must be understood that common sense, caution and carefulness are factors which cannot be
built into this product. These factors must be supplied by the person(s) installing, caring for and operating the unit.
TOOLS & MATERIALS REQUIRED
• PHILLIPS SCRE WDRIVER
• FL AT SCRE WDRIVER
• WRENCH OR PLIERS
• WIRE CUTTER
• S TEPL ADDER
• WIRING SUPPLIE S AS RE QUIRED BY
ELE CTRICAL CODE
NOTE:
mounting
or fan
fan.
| hinkley.com |
©2019 Hinkley Lighting, Inc.
03