Smart By Bond - Hinkley HOVER Manual Del Usuario

SMART BY BOND

HINKLEY SMART FAN OPTIONS:
In add ition to the included wal l con trol, you c an con trol your Hinkley fan
through the Bond app .
• To use the app , download it f or free fr om the App Stor e or Google Play
• Open the app to cr eate y our accoun t. You c an also log in with y our
Facebook or Google accoun t.
• Nex t, set up a WiFi connection. You will need the SSID and WiFi
passwor d for the net work you wan t to connect to.
• You will receive a pr ompt to choose the finish of y
your fan device .
• The app will wal k you through the main scr een and show you how to
change fan speeds, dim the ligh t, set timers or utilize breeze mode .
NOTE: Maximum of 2 fans c an oper ate on a circuit through the wal l
con trol. Maximum of 12 fans c an oper ate on a circuit through an on/off
switch or break er when utilizing the app for the fan con trol (without the
wal l con trol in the circuit).
How to correct "Fan paired to wrong transmitter" on Smart by
Bond fans supporting multiple transmitters:
• Smart Phone Method (recommended)
a) Open the Bond Home app.
b) Tap on the Fan you want to modify.
c) Tap the settings icon in the upper right corner.
d) Scroll down and tap "Manage Remotes".
e) Delete just the remotes in question; or, use the
triple-dot menu and select "Forget all remotes".
f) Tap "Learn a new remote".
g) Follow on-screen prompts to (re) learn the desired
remotes into the fan.
• Factory Reset Method
a) Turn mains power OFF to all fans.
b) Turn mains power ON only for the fan needing code correction.
c) Within 15 seconds of turning on, hold down the Speed 1 button
on any compatible transmitter for 20 seconds.
d) The fan light should blink 5 times and may spin up on low speed
for 10 seconds.
e) Wait 10 seconds.
f) Hold down the Power button on the transmitter you wish to pair.
The fan light should flash three times and the motor spin up for 10
seconds on low speed.
g) If you were using the fan on Wi-Fi, you will need to reconnect to Wi-Fi.
18 | hinkle y.com
• Brute Force Method
a) Turn mains power OFF to the fan.
b) Turn mains power back ON on the fan.
c) Hold down the Power button on the transmitter for 5 seconds,
.
until the fan light flashes 3 times.
d) Repeat steps a--c above 4 more times.
e) The fan's memory is now totally overwritten, and it has forgotten
all other remotes.
our fan and name
https://bond home .io/app