Garden Treasures ALC31315 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Place the tabletop (A) upside down on a flat,
non-abrasive surface. Attach the table leg (C) to the
tabletop (A) with bolts (AA) and washers (BB). Hand
tighten 2-3 revolutions only. Repeat for the other
three table legs (C).
Hardware Used
Bolt
AA
BB Washer
2. Attach a table leg (C) to the leg connector bracket
(B) by carefully guiding the bolts (AA) previously
assembled on table leg (C) through the holes in the
leg connector bracket (B). Add a washer (BB) and
nut (CC) to the end of each bolt (AA). Hand tighten
only. Repeat for the other three table legs (C).
Hardware Used
BB Washer
CC Nut
3. Tighten all bolts and nuts using the hex
bolt driver (GG) and hex wrench (FF). Note: Tighten
each bolt a few revolutions at a time. It is
recommended you work working in a cross (X)
fashion, alternating between bolts and nuts. This will
tighten the frame evenly by placing equal pressure
on all bolts and nuts joints. Do not overtighten.
Cover the bolts and nuts with bolt covers (DD) and
nut covers (EE).
Hardware Used
Bolt Cover
DD
Nut Cover
EE
Hex Bolt Driver
FF
Hex Wrench
GG
With the help of another person, carefully turn the table
in the upright position. Your table is now ready for use.
1
x 4
x 4
2
x 8
x 8
3
x 4
x 8
x 1
x 1
Lowes.com/gardentreasures
4