Adjusting The Seat - Sunny PRO II MAGNETIC Manual Del Usuario

ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your shoe
fits snugly in the toe clip cage. Rotate one foot to within arm's reach
and pull the strap until the toe clip cage fits your shoe snugly. Insert
the strap back into the hoop of the toe clip. Repeat this for the other
foot.

ADJUSTING THE SEAT

The Seat (No. 95) of this bike is fully adjustable as it moves Up,
Down, Fore (forward), Aft (backward).
To adjust the height of the Seat Post (No. 4), loosen and pull the
[seat post] Pop-pin Knob (No. 91) outward, then raise or lower the
Seat (No. 95) to the desired height. Once adjusted, re-insert and
tighten the [seat post] Pop-pin Knob (No. 91) to secure the Seat
(No. 95) in place.
To adjust the Seat (No. 95) back and forth, loosen and pull [seat
slider] Pop-pin Knob (No. 91) outward, then slide the Seat Slider
(No. 5) to the desired position. Once positioned, re-insert and tighten
the [seat slider] Pop-pin Knob (No. 91) to secure the seat slider
tube in place.
CHECKING PEDALS
Ensure all the Nuts, Nut Caps and Pedals are secured and inspect
the equipment regularly. If you should find any defective parts, do
not exercise until they've been repaired.
Inspect the pedals before exercise. If they have become loose,
please re-tighten.
TIGHTENING THE SEAT
Please adjust the Hexagon Nuts by using the Wrench (No. 107) if
the Seat (No. 95) is loose.
18