Snooze Function; Sleep Function - Gear4 Renew SleepClock PG754 Manual Del Usuario

To set the clock:
■ Simply launch the Renew SleepClock app
and the date and time will be automatically
synchronised from your iPod touch / iPhone /
iPad.
■ To set the clock without your iPod touch /
iPhone / iPad, put Renew into standby mode
by pressing the Power button ( ); the LCD
should briefly display OFF. Then, press and
hold the Power button ( ) for 5 seconds.
■ The LCD will display '12h', indicating 12-hour
mode. You can set the clock to 24-hour mode
by pressing the – or + buttons.
■ Press the SCAN button to save your setting.
■ The hour digit will start flashing. Use the – / +
buttons to adjust the hour.
■ Press the SCAN button to save your setting.
■ The minutes digits will start flashing. Use the
– / + buttons to adjust the minutes.
■ Press the SCAN button to save your setting.
■ The day of the week will start flashing. Use
the – / + buttons to adjust the day.
■ Press the SCAN button to save your setting.
To set the wake up time:
■ Simply launch the Renew SleepClock app
and set a wake up time range in the app. This
is the easiest method to set a wake up time.
■ The Renew SleepClock app will allow you to set
a wake up time range, for example from 7am to
4 GEAR4 | Renew SleepClock | User Manual
All manuals and user guides at all-guides.com
7.30am. By combining the sleep data received
from the Renew SleepClock's integrated sensor,
the app will pick the best point to wake you
within the selected time range.
■ If you are in a deep sleep cycle during the
entire time range, the wake up sound will set
off at the end of the range (7.30am in our
example).
Note: The app will synchronise the wake up
time(s) and day(s) to Renew SleepClock. This
means the wake up function will work without an
iPod touch / iPhone / iPad docked, however the
wake up time will be set to the end of the range
selected in the app. For example, if you set a
wake up to go from 7.00am to 7.30am in the
app and undock your iPhone, the wake up will
be active at 7.30am on Renew SleepClock.
You can set a wake up time manually without
the app by following these steps:
■ Press and hold the SLEEP | SNOOZE button
for 5 seconds until SET and the icon for
Wake Up 1 appears in the day display.
■ Press SLEEP | SNOOZE if you wish to set
the time for Wake Up 1 or SCAN to cycle to
Wake Up 2 and then SLEEP | SNOOZE to
select it.
■ The hour display will start flashing. You can
adjust the hour by using the – / + keys.
■ Press SCAN and the minutes display will
start flashing. You can adjust the minutes by
using the – / + keys.
■ Press SCAN and the day display will start
flashing. You can adjust the day to Weekday
(M-F), Weekend (S-S) and All day (ALL) by
using the – / + keys.
■ Press SCAN and the audio source display
will start flashing. You can adjust the source
to iPod or radio by using the – / + keys.
■ Press SCAN to complete setting the wake up.
To activate and deactivate
Wake Up 1 & 2:
■ Simply launch the Renew SleepClock app
and activate or deactive the Wake Up
functions. This is the easiest method to set a
Wake Up.
■ To set a Wake Up without your iPod touch /
iPhone / iPad, press and hold the SLEEP |
SNOOZE button for 5 seconds until SET and
the icon for Wake Up 1 appears in the day
display. The LCD panel will also display the
wake up time.
■ Wait 5 seconds for Wake Up 1 to be activated
or press SCAN and the icon for Wake Up 2
will be displayed.
■ Wait 5 seconds for Wake Up 2 to be activated
or press SCAN and the icons for Wake Up 1
& 2 will be displayed.
■ Wait 5 seconds for the Wake Up 1 & 2 to be
activated or press SCAN to disable both
Wake Up times.
Note: When setting the above functions, the
speaker will return to the previous display after
5 seconds of no activity.

SNOOZE FUNCTION:

■ When the wake up tone sounds, press the
SLEEP | SNOOZE button on the speaker
to delay the wake up.
■ Press the standby button ( ) to stop the wake
up tone.
■ The wake up will be active for 20 minutes if
no buttons are pressed.

SLEEP FUNCTION:

■ When going to bed, start playing your music
and then press the SLEEP | SNOOZE button.
The Sleep function will mute the audio once
you are asleep when you use the Renew
SleepClock app.
■ If the Renew SleepClock app is closed (you
must close it in the multi-tasking bar of your
iPhone/iPad), the sleep function can be set to
a fixed time in increments of 10 minutes by
pressing the SLEEP | SNOOZE button.
Sleep statistics:
■ You can obtain a full overview of how well
you slept by using the Renew SleepClock
app. Use the statistics tab to browse through
statistics and get a detailed view of your
sleep cycles.
User Manual | Renew SleepClock | GEAR4 5