Using Your Remote; Master Volume Feature - GE 11695 Manual De Instrucciones

input
aux
input
dvd aux
setup
D
tv cbl
setup
C D
menu
A B
tv cbl
exit
menu
exit
A B
list
list
tv cbl
menu
A B
tv cbl
menu
All manuals and user guides at all-guides.com

Using Your Remote

input
tv cbl dvd aux

Master Volume Feature

The Master Volume Feature allows you to select a
tv cbl
single device (TV or audio receiver) that the volume
menu setup
control always controls. For example, the remote can
input
be in TV mode while the volume buttons control the
A B C
volume on your audio receiver instead of your TV.
dvd aux
menu
Enabling the Master Volume Feature
1. Press and hold the SETUP button
A B
setup
input
2. Press and release desired device
C D
dvd aux
list
3. Press and release the MUTE button.
4. Press and release the VOL + button.
setup
list
C D
To test the feature put the remote in
another mode such as the TV mode if
exit
you programmed the audio receiver to
be the Master Volume Device. Point the
remote at the audio receiver, press and
hold either the VOL - or the VOL + button.
If the audio receiver volume changes then
the remote is programmed correctly. If
the TV volume changes and not the audio
exit
receiver, you will have to repeat the steps
input
above and test again.
dvd aux
Disabling the Master Volume Feature
1. Press and hold the SETUP button
setup
input
C D
2. Press and release the device
dvd aux
setup
input
dvd aux
D
setup
C D
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
button (TV, CBL, DVD, AUX) for the
device you wish to setup to always
exit
control the volume.
exit
The red indicator will blink twice and
then go off.
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
button (TV, CBL, DVD, AUX) which is
programmed to control the Master
Volume Feature.
10