Important Safety Information - UTRAI Jstar One Manual Del Usuario

Important Safety Information

WARNING: Read all instructions and warnings prior to using this product.
Improper use of this product may result in product damage, excess heat,
toxic fumes, fire or explosion,for which Corporation is not responsible.
• Always read all instructions carefully before using your Jump Starter.
• Do not submerge your Jump Starter in water, or expose it to rain or moisture.
• Never open or disassemble your Jump Starter as it will void your warranty.
• Do not expose your Jump Starter to fire, intense heat, or flammable liquids.
• Only charge the product at temperatures between -20℃~+75℃
• Keep away from and out of reach of children.
• Do not insert foreign objects into ANY inputs or outputs.
• Do not allow the metal teeth of the red clamp to touch the metal teeth of the
black clamp when connected to your Jump Starter.
• Do not connect the black clamp to the vehicle battery's positive(+) terminal
when connected to your Jump Starter. Do not connect the red clamp to the
vehicle battery's negative(-) terminal when connected to your Jump Starter.
• Do not open your Jump Starter to replace the internal battery. No user-replac
able parts are inside your Jump Starter.
• Always disconnect the jump start cables from your Jump Starter after use and
store separately.
• For protecting this unit, make sure the battery capacity of jump starter is above
75% before jumping start your car.
• Check the power of the product at least every three months, and charge the
product in time.
EN 10