Numark DM1002MKII Manual De Inicio Rápido Para El Usuario página 2

All manuals and user guides at all-guides.com
HOUSE AMP
CD BURNER
TAPE DECK
OR
FROM RECORD
TO AMP
1. Make sure all items listed on the front of this guide are included in the box .
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders are at "zero"
6. Connect all stereo input sources as indicated in the diagram .
7. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio sources.
8. Plug your mixer and other devices into AC power.
9. Switch everything on in the following order.
• audio input sources (i.e. turntables or CD players)
• your mixer
• last, any amplifiers
10. When turning off, always reverse this operation by,
• turning off amplifiers
• your mixer
• last, any input devices
11. Go to http://www.numark.com
CD PLAYER
TO PHONO 2
MIXER QUICK SETUP GUIDE (ENGLISH)
for product registration.
CD PLAYER
TO LINE
TO LINE
TO PHONO 1
TO LINE
TO LINE