Garland GIRAFFE 312 G Manual De Instrucciones página 36

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

English
Gasoline and oil are extremely flammable
and explosive under certain conditions. Do
not smoke while preparing or refueling.
Do not approach any flame or hot element to the fuel.
Do not smoke when handling fuel, when refilling or
when working.
Do not refill fuel in areas where flames, sparks or hot
sources are. Refill only in ventilated areas with engine
off. Do not overfill the fuel to try to overfill the fuel
tank. In case of fuel leakage, eliminate these before
starting the machine, do not attempt to start the
engine but move the machine away from the area of
spillage and avoid creating any source of ignition until
petrol vapours have dissipated.
Refill fuel before to start the machine. Do not unscrew
the combustible tank cap while the engine is running
or engine is hot.
Make sure the gas cap is properly closed while
operating the machine. Be sure to properly close the
gas cap after refueling.
Store fuel in a bottle or tank homologated and
according to current regulations.
2.5. SAFETY IN THE USE OF OILS
IMPORTANT: The oil used for this machine is highly
flammable. If oil or machine ignites, turn off the heat
with a dry powder extinguisher.
The oil is dangerous, avoid contact of the oil with
the skin and eyes. Do not inhale or ingest it. If you
drink oil, go to your doctor quickly. If you come in
contact with the oil, clean it with plenty of soap and
water as soon as possible. If you later feel irritated
eyes or skin, consult a doctor immediately.
The oil is extremely flammable and explosive under
certain conditions.
Do not smoke and do not bring flames,
sparks or sources of heat to the machine.
Do not smoke while transporting oil, when
refilling the tank or when working.
Make sure the oil cap is properly closed while using
the machine. Be sure to properly close the oil cap
after refueling.
Always store the oil in approved containers that
comply with European regulations.
2.6. USE AND CARE OF THIS MACHINE
This pruner has been designed for tree pruning
(branches in height). Use this machine exclusively for
this purpose. Do not use the machine to cut trees,
chop wood or cut products other than wood.
Cut only wood. Do not use the machine for other
purposes not provided. For example: do not use the
machine to cut plastic materials, bricks or building
materials other than wood. The use of the machine
for operations other than those planned may cause
dangerous situations.
Use this machine, accessories, tools, etc. in
accordance with these instructions and in the planned
manner taking into account the working conditions
and the work to be carried out. The use of this
machine for applications other than those intended
may cause a dangerous situation.
Check that all security elements are installed and in
good condition.
Remember that the machine operator is responsible
for the dangers and accidents caused to other people
or things. The manufacturer will not be liable in any
36/174

Publicidad

Tabla de contenido
loading

Tabla de contenido