General Operating Notes - EisSound KBSOUND 42697 Manual De Usuario

4

2. General Operating Notes

1.- None of the functions (except ON/OFF) work unless the remote control is in "on" mode.
2.- Functions pertaining to operating the audio signal only work when "mute" is cancelled.
3.- Once the is connected to the mains, it will remain powered even it is in OFF state. That
KBSOUND ®
means that the OFF state (as indicated in this manual) really means a "standby" state
4.- A short BEEP sound signal indicates that the data was received
5.- The remote control unit exchanges information (transmits and
receives data) by means of the transmission-reception capsule. If
at any time there is a failure in the synchronicity of communication,
the screen will display the symbol. In the event of this
occurring, point the remote control to the transmission-reception
capsule at a straight-line distance of no greater than 5 meters.
6.- The remote control display will
automatically turn off when there has been
no keying activity for more than a few
seconds, ensuring more efficient battery
usage. To view the display information at
any time, point the remote control to the
transmission-reception capsule and press
the key.
PRG MEM PGR MEM
PGR MEM PGR MEM
FM FM
FM FM
All manuals and user guides at all-guides.com
BIP
control for a specific amount of
PGR ON/OFF PRG ON/OFF
7.- To illustrate that an
operation requires holding
down a key on the remote
time, the symbol will
appear in the manual next to
the key.
5m
The will turn on
KBSOUND ®
with the audio and station
frequency settings saved as
"ideal" mode settings (see
chapters 5 and 6) when the
unit is connected to a power
supply.
When switched off and on
while connected to the
power supply, the audio and
station frequency settings
will be as when the unit was
switched off with the remote
control ON/OFF key
CC-1146-01.1