3. Operating Audio Functions
If the control unit is off, a brief press on the
Loudness: It reinforces the bass level in terms of the signal volume, assuming a
greater backing at a lower volume and a lesser backing at a higher volume.
Mono/stereo reception: When activated, this feature allows the FM stations to be received in
Note: If the control unit's configuration is mono (see Installation Sheet supplied with this kit), the
signal will always be received in mono even if the signal received by the antenna is in stereo.
All manuals and user guides at all-guides.com
ON/OFF key
The LED will display the word "ON"
When the control unit is off, the LED will be OFF.
Increase/decrease in the signal volume: The LED will
flash to indicate the desired change in volume.
Increase/decrease in bass/treble levels: The
LED will flash to indicate the desired change in the
Mute: the unit becomes silent (mute activated)
stereo. When cleared, this feature only allows for mono reception.
will gradually turn on the unit
(between 1 and 2 seconds).
bass/treble levels.
Key Sequence
Display
on
PGR ON/OFF
PRG ON/OFF
vol 58
BASS/
BASS/
BASS/
BASS/
TREBLE
TREBLE
TREBLE
TREBLE
BAS+06
MUTE
MUTE
MUTE
MUTE
MUTE
LD on
LOUD
LOUD
LOUD
LOUD
STEREO
M/ST
M/ST
M/ST
M/ST
CC-1146-01.1
5
ENG