Publicidad
Idiomas disponibles
Idiomas disponibles
instruction manual
operAtion - before first use
Remove the device from the packaging and remove all the packaging materials.
operAtion - use
•
In order to avoid overheating, do not cover the device.
•
The device must not be located immediately below a socket-outlet.
•
Do not use this device in the immediate surroundings of a bath, shower or swimming pool.
1. Place the fan heater on a stable surface and ensure that the grilles for the supply and removal of the
air are unobstructed.
The anti-tipping safety (10) device is located under the heater's foot (9). If the foot of the heater is
not placed on the surface correctly, then the safety device will turn off the heater.
2. Insert the plug (11) into the plug socket. The On/Off indicator light (1) will be lit.
3. Use the function button (4) to select one of the following functions:
0
Off
Cold air
I
Warm air
II
Hot air (2000W max
4. Rotate the thermostat button (3) towards the right. A click will be heard to indicate that the appliance
has been turned on. The temperature is adjusted by turning the thermostat button further.
To find the ideal thermostat setting, rotate the thermostat button as far as possible towards the plus sign
(+). Once the room has reached a comfortable temperature, slowly rotate the dial towards the
sign (-) until you hear a click. The heater will then turn itself off. The temperature control will ensure
that the room remains at the set temperature.
5. Press the swing function button (3) if you want the (warm) air to be distributed throughout the room.
The heater will then swing back and forth.
Please do not cover the appliance.
cleAning And MAintenAnce
1. Remove the plug from the wall socket and allow the appliance to cool.
2. Clean the exterior of the housing with a damp cloth and rub it dry with a clean cloth.
•
Never immerse the appliance, plug or power cord in water.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
tHe enVironMent
•
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
•
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
(1000W)
)
21
minus
Publicidad
