Installing Software - Asus Xonar D-KARA Manual Del Usuario

Connecting to a TV tuner card
1. If you have a traditional PCI TV tuner card on your PC, you may need to
connect it to the Xonar D-KARA card to send the tuner card's sound to your
PC speakers.
2. Secure the PCI TV tuner card and screw it into the back-panel.
. Connect the audio output header from the TV tuner card to the Aux-In header
of the Xonar D-KARA card.
For optimum TV audio quality, Xonar D-KARA uses ADC recording to digitize
the signal and loops it back to DAC playback. Select Aux-In as the recording
source in the Xonar D-KARA Center's recording mixer and enable the
monitoring button to pass this signal to the audio output. Using this setup, you
can even turn on sound effects such as Dolby Headphone to expand the stereo
TV audio to 5.1 channel surround sound in any set of headphones. TV audio on
your PC will become even better than on your TV set.

Installing software

Installing the card driver
Ensure that you have installed the audio card before installing the Xonar D-
KARA driver. Otherwise, driver installation error may occur.
1. After you have installed the Xonar D-KARA card, turn on your computer.
Windows automatically detects the audio card and searches for device
®
drivers. When prompted for the drivers, click Cancel.
2. Insert the support CD into the optical drive. If Autorun is enabled in your
system, the setup starts automatically. If not, run setup.exe from your
support CD.
3. Follow the onscreen instructions to finish the installation.
The version and content of the support CD are subject to change without notice.
ASUS Xonar D-KARA 7