Tabla De Contenido; Safety Guidelines - Definitions; Product Specifications Kn Dp-2000N; General Power Tool Safety Rules - KNOVA KN DP-2000N Manual De Instrucciones

TABLE OF CONTENTS
Safety guidelines - definitions ............................................. 1
Product specifications KN DP-2000N ................................. 1
General power tool safety rules .......................................... 1
Important safety instruction for drill press .......................... 2
Electrical requirements and safety ...................................... 4
Glossary of terms ................................................................ 5
Symbols ............................................................................... 6
Carton contents ................................................................... 6
Functional description ......................................................... 7

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY
and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may
result in property damage.

PRODUCT SPECIFICATIONS KN DP-2000N

Motor: 1/3 HP, 120 V ~, 60 Hz
Speeds: 5 (750 - 3 200 RPM)
Morse cone: JT 33
1/2" (13 mm)
Chuck size:
Table tilt: 45º L & 45º R

GENERAL POWER TOOL SAFETY RULES

WARNING
• Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
• People with electronic devices, such as
pacemakers, should consult their physician(s)
before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker
could cause interference or failure of the pacemaker.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
Tools needed for assembly ................................................ 8
Assembly and adjustments ................................................ 8
Operating instructions ....................................................... 12
Maintenance ...................................................................... 14
Troubleshooting ................................................................. 15
Parts list ............................................................................ 16
Exploded view .................................................................... 17
Notes ................................................................................. 36
Spindle travel: 2" (50.8 mm)
Distance from
spindle to column: 4" (101.6 mm)
Column diameter: 1-13/16" (46 mm)
Table size: 6-15/32" x 6-15/32"
• Keep children and bystanders away while operating a
Electrical safety
• Power tool plugs must match the outlet. Never modify
• Avoid body contact with earthed or grounded surfaces,
• Do not abuse the cord. Never use the cord for carrying,
1
Base size:
Overall height:
Weight:
Laser guide:
power tool. Distractions can cause you to lose control.
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
10-7/8" x 7"
23" (584.2 mm)
31.75 / 34.4 lbs
Yes