Mounting The Camera - Messoa NCC800 Guia De Inicio Rapido

2. Installation

2.1 Mounting the Camera

1. Drill three holes at the desired location and insert provided anchors
into the holes. Then fasten the provided screws into the anchors to
secure the camera to the wall.
2. To adjust the camera angle, use a torx key to loosen the two
screws and loosen the knob. After adjustment is done, fasten the
screws and the knob.
All manuals and user guides at all-guides.com
Loosen the two screws
and the and knob.
NCC800/NCC800WL l Quick Start Guide 5