Whalen Hendricks HEN75C Manual Del Usuario página 6

Tools required: Phillips screwdriver, Mallet, Power Drill, and 3/8" Drill Bit.
5. Ask for assistance to position the Console (A) at the desired location against a wall.
6. In case of uneven floor, the Floor Levelers are provided at the front corners of the base. Open the outer door
and you will see a hole at each front corner of the base, use the enclosed Allen wrench to turn the leveler
and adjust the height of the unit, until the unit is level.
7. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach
the tip-over restraints to the unit and the wall, as shown in the illustration.
NOTE: Young children can be seriously injured by tipping furniture. You must install the
Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents
or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for
proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add
the extra security of earthquake restraints, they must be purchased and installed separately.
8. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the console.
Assembly Instructions
6
A