Changing The Water Filter - Samsung RF323TE Manual Del Usuario

If you don't want to make more ice,
( 9 ) Ice Off
touch the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you to stop ice
making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is
ON, and the water Line is not
connected, there will be a water
valve noise from the back of the
unit. press the Ice Off (Hold 3sec
for child lock) button for less
than 3 seconds until the Ice Off
Indicator (
The function key will operate after you remove
your fi nger from the letters except E.Saver, Ice
and Water key.
( 10 ) Filter Water fi lter usage
This icon will light up when you need to
change the fi lter. After you use about
300 gallons of water, the fi lter indicator
lights up. (about 6 months). After you
install the new water fi lter, reset the fi lter
indicator by touching the Alarm/hold 3
sec for Filter Reset button.
•
•

CHANGING THE WATER FILTER

To reduce risk of water damage to your
property DO NOT use generic brands
WARNING
of water fi lters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of
a generic water fi lter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change your
water fi lter cartridge.
To give you time to get a new fi lter,
the red light comes on just before the
DA68-02603A.indb 13 DA68-02603A.indb 13
All manuals and user guides at all-guides.com
) illuminates.
If water is not dispensing or
dispensing slowly, you need to
replace the water fi lter because
the water fi lter is clogged.
Some areas have large amounts
of lime in their water, which
causes the water fi lter to clog
more quickly.
(Red) (Red)
capacity of the current fi lter runs out. Changing
the fi lter on time provides you with the freshest,
cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the water
fi lter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water fi lter ( 1 ) from the case fi lter ( 2 ).
• To change the water fi lter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
fi lter because impurities in the water cause it
to stick. If you are having diffi culties, grip the
water fi lter fi rmly and pull it hard.
• When you pull the
water fi lter, a little
water can leak from
the opening. This is
normal. To minimize
the water leaks, keep
the fi lter cartridge horizontal when you pull it.
• To prevent overfl ow, empty the water fi lter tray
( 3 ) and dry around the fi lter case ( 2 ).
3. Insert the new fi lter into the fi lter case (
4. Push the fi lter, and then turn it clockwise until it
locks.
• If you have trouble inserting the water
fi lter because of high water pressure,
shut off the water supply valve.
• The locked symbol should be lined up
with the indicator line.
4
2
1
2
3
4 ).
operating _13
2012.5.30 1:25:44 PM 2012.5.30 1:25:44 PM