Battery Removal; Technical Specifications - Trevi DJ 12E30 BT Manual Del Usuario

ENGLISH
2. Turn On the device and short press
- Short press
- Press button (6) to skip to the next track;
- Press button (8) to go back one track.
WIRED MODE
Plug the audio cable in the mini jack input, you can now use the headphones with a cable (not supplied),
hedphone must be in Off mode.
NOTE: In wired mode, the headphones controls don't work, you should use the volume control and the track
control from your player.
WARNING FOR THE PROPER USE OF RECHARGEABLE BATTERY
- Charge the battery at a temperature between 5° C and 35° C.
- Do not extend the recharge over the indicated time to avoid the risk of overheating and explosion.
- The charging of the battery over the indicated time period or a prolonged period of inactivity can shorten
battery life.
- The rechargeable battery is subject to wear and its capacity gradually decreases.
- To prolong battery life, use it when it is fully charged to fully discharge and then fully charge it again
before using it again.
- Putting in a battery is not depleted, its lifetime will be reduced. In this case, repeat the cycle charge /
discharge fully again.
- Avoid keeping the battery undercharge all night.
INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: Only high-qualified personnel should perform this operation!

BATTERY REMOVAL

- Remove the R lid.
- Locate the battery and remove it carefully.

TECHNICAL SPECIFICATIONS

Bluetooth® profiles: .....................
Bluetooth transmission power: .....
Bluetooth transmission frequency:
Battery: ........................................
Power: ..........................................
Weight: .........................................
button (7) to play or pause the song;
V5.0
2,5mW
2.4GHz
Rechargeable Lithium battery 3.7V
5V
166 gr.
button (9), until the voice indicates "Music play mode":
1A
PAG.7
DJ 12E30 BT
200mA