How To Store; Replacement Parts - NUTRIBULLET SELECT Manual De Instrucciones

• NEVER USE A PITCHER THAT
DOES NOT PROPERLY ALIGN
WITH THE BLADE.
may cause the pitcher and
motor base to separate,
exposing the
blade assembly and
potentially causing severe
personal injury.
TAMPER
• Always hand-wash the
tamper with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
STUBBORN CLEAN UP:
If ingredients get stuck to the
nutribullet
®
extractor blades, or pitcher,
here's an easy cleanup solution:
fill the vessel with room
temperature (21°C/70°F or less)
water to its MAX line and add
1-2 drops of dish soap. For cups,

Replacement parts

To order additional parts and accessories, please visit our website
nutribullet.com
at
28
Doing so
cups, easy-twist
or feel free to contact customer service.
twist on the easy-twist extractor
blade, and blend on the motor
base for 20-30 seconds. For the
pitcher, attach lid and blend on
the motor base for the same
amount of time, 20-30 seconds.
This should loosen debris
enough to scrub away with
soap and water.

How to store:

Store the nutribullet
upright with the pitcher lid
secured on top. Do not place
anything on top of the pitcher
lid. Store remaining pieces in a
safe place where they will not be
damaged and won't cause harm.
WARNING: NEVER
easy-twist extractor blade on the
motor base without a nutribullet
cup or the pitcher attached as the
exposed blades pose a serious
laceration hazard.
Select
®
store the
®