Assembly Instruction - Costway SP35307 Manual Del Usuario

Assembly Instruction

1. STABILIZER ASSEMBLY
Divide the front stabilizer and rear
stabilizer, to fix them onto the main
body with bolts T1 x 4, washer x 4
and nuts x 4.
2. PEDAL(L/R) ASSEMBLY
Fasten the left pedal by turning in
an anti-clockwise direction, and
then tighten anti-separation nut in
an anti-clockwise direction.
Fasten the right pedal by turning in
a clockwise direction, and then
tighten anti-separation nut in a
clockwise direction.
04
www.costway.com www.costway.com
3. SADDLE ASSEMBLY
Loosen the lock knob and pull
out, insert the saddle post
assembly into the rear opening
tube, and then tighten the lock
knob.
Loosen the lock nut to select
the correct position and fix the
nut.
Place the saddle onto the
saddle adjustment frame and
tighten the saddle locking nuts
4. HANDLE & MONITOR
ASSEMBLY
Loosen the lock knob and
insert the handle frame
assembly into the opening
tube, and tighten the lock knob
when the handle frame at
desired position.
Attach the monitor holder to the
handle frame and fix the
monitor, connect the sensor
wire into the monitor.
- Assembling Finish -
05