Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
The cash drawer has been pre-assembled to make the installation
as simple as possible. Connect the drawer to the POS printer as
shown in Figure 1. Whenever the POS application software sends
a drawer open command to the POS printer, the printer will output
an 12 to 24 voltage electrical pulse to open the drawer.
PROCEDURE
1. Remove the cash drawer from the packing.
2. Remove the keys and interface cable from the plastic bag.
3. Connect the interface cable to the POS printer.
4. Connect the other end of the interface cable to the "Control
Signal Input" of the cash drawer.
5. Insert the bill dispenser divider and bill clipper to the cash tray.
Cash Drawer
Interface
Cable
Rear View
W
RJ Interface
Figure 1
3
Installation
POS Printer
E
N
G
L
I
S
H
Publicidad
Capítulos
Tabla de contenido
