Test Command - GrandTech CD-100II Manual De Usuario

TEST COMMAND

The following test sequence will verify that the cash drawer is
working properly. Before start this procedure, the cash drawer
must install correctly as outlined in the installation section.
PROCEDURE
Serial interface POS printer:
1. From the C prompt type " MODE COM 1 96,N,8,1" and press
ENTER.
2. Type " TYPE CON>COM1" and press ENTER.
3. Type any alphanumeric character(s) and press ENTER. The
cash drawer will open.
4. To return to the C prompt press and hold the CTRL key while
depressing the letter C.
Parallel interface POS printer:
1. From the C prompt type " TYPE CON>LPT1" and press
ENTER.
2. Type any alphanumeric character(s) and press ENTER. The
cash drawer will open.
3. To return to the C prompt press and hold the CTRL key while
depressing the letter C.
4
Test Command
E
N
G
L
I
S
H