Horizon Global 76555 Instrucciones De Instalación página 5

4. Install hitch - Using wire brush to clean the weldnuts if needed. Raise the hitch into position and loosely install conical washers ② and hex bolt ① to the hitch, see
Figure 1.
5. Tighten all M12 X 1.25 X 40 CL10.9 fasteners with torque wrench to 76 ft.lb. (103
N*m).
6. Reinstall spare tire and exhaust.
©2021 Horizon Global™ Corp - Printed in Mexico
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 5 of 15 76555NP 11-12-21 Rev. A