Insert Batteries - Wilfa SPLASH KW-60 Manual De Instrucciones

CHANGE WEIGHT UNIT
In weighing mode, press the UNIT button to select your desired unit (g, fl.oz, lb,
oz, ml). The units will be displayed in the LED display. (The default unit is g).
NOTE: After you have selected your desired weight unit, you may start the
weighing. If there is no operation, the scale will switch off automatically in about
2 minutes. Or you can press and hold the ON/OFF/TARE button for about 2s to
switch the scale off.
KITCHEN SCALE · KW-60

INSERT BATTERIES

1. Use the screwdriver to unscrew the
battery compartment cover.
2. Insert the batteries (3X 1,5V AAA)
into the battery compartment
according to the indications for
polarity (+-) located on the inside of
the compartment.
3. Close the battery compartment
cover with firm pressure, and use
screwdriver again to tighten the
screws.
• The LED display will light up if
batteries has been places correctly.
7
EN