Taking Pictures; Turning The Camera On And Off - CONCORD Eye-Q 2040 Manual Del Usuario

TAKING PICTURES

TURNING THE CAMERA ON AND OFF

The power button is located in the back of the camera.
1. Press the ( ) Power button to turn the camera on. (fig.1.1)
• The LCD will turn on automatically.
• The camera is ready for picture taking when the flash ready
LED stops blinking.
2. To turn the camera off press the (
seconds
Note: To extend battery life, the camera will automatically power off after 60 seconds of
inactivity. To change this setting, place refer to page 25.
TAKING A PICTURE WITH THE VIEWFINDER OR LCD
1. Set the camera to (
• The LCD can be switched off to conserve battery power by pressing the (
2. Frame the subject in the viewfinder or LCD.
3. Press the shutter button to capture the image.
• When the image has been captured, the Flash Ready LED next to the viewfinder will
blink to indicate that the image is being stored.
TAKING PICTURE WITH DIGITAL ZOOM
A
A
A
AWB AWB
AWB WB
1x 2x 4x
The camera can use up to 4x digital zoom to magnify into the subject.
1. Set the camera to (
2. Position the subject in the LCD.
A
A
A
3. Press to zoom into the subject.
4. Press to zoom out or to return to normal mode.
AWB AWB
AWB
005/042
All manuals and user guides at all-guides.com
) Power button for a few
) Camera Mode.
1600 1600
1600 1600
A
A
AWB WB
AWB
005/042 005/042
005/042 005/042
1600 1600
1600 ) Camera Mode.
Press OK Play AVI
005/042
005/042
1600 1600 1600
1600
A
A
A
1600
A
AWB
AWB
AWB
AWB
1x 2x 4x
005/042 005/042 005/042
005/042 005/042
A
Press OK Play AVI Press OK Play AVI AWB
005/042 005/042
005/042
3
fig.1.1
) button.
1600 1600 1600
1600
1600
A
A
005/042
AWB AWB WB
1x 2x 4x
005/042 005/042 005/042
005/042
1600 1600
1600
A
A
AWB
AWB
005/042 005/042
005/042