Aqua Medic Armatus 250 Manual De Instrucciones página 9

The floating gauge is adjustable in its angle, thus the water level in the pump compartment can be adjusted.
Make sure that the circulation pump does not block the floating gauge.
In order to avoid corrosion on hinges and units, ensure adequate ventilation of the base cabinet.
The filter bags (Fig. 1, No. 7) have a coarse mesh size. They can be filled with activated carbon or, to serve as
a fine filter, with usual filter cotton wool.
There is a blue fitting in the mounted bend of the return line (Fig. 2, No. 1). Here, air is sucked in when the
pump in the cabinet fails. This prevents the formation of communicating pipes and an overflow of the filter tank
by returning water.
3. Operating the aquarium
To operate the Armatus, we recommend the following products:
The circulation pump should be that strong that the total amount of water is pumped through the filter at least
4 to 5 times per hour (for example an Aqua Medic DC Runner pump). The flow in the aquarium is done by
current pumps. We recommend Aqua Medic EcoDrift pumps, one of which is mounted on the right and the left
side of the aquarium. Mutual operation is possible with the EcoDrift Wireless Master Controller.
Important, especially when keeping stony corals, is a sufficiently sized skimmer, for example from the Aqua
Medic power flotor or K-series.
For the lighting (Aqua Medic aquarius, Qube 50 or angel LED) we recommend to take the tank volume times 0.2
W/l as the lower limit, in case of colored stony corals 0.5 to 1.0 W/l.
The Aqua Medic Tri Complex is used to supply corals with essential lime and trace elements and to stabilize
the pH-value. For pH monitoring, we recommend the Aqua Medic pH monitor. To feed the corals, we recommend
the coral food coral fit.
We recommend to prepare your saltwater with osmosis water in order to minimize algae problems by silicic
acids, phosphates and nitrates from the beginning. Sea salt of Aqua Medic is formulated from highly purified
compounds. In this way, it will support you to keep the content of the above-mentioned substances as low as
possible.
The fixing of rocks and corals can easily be done with the underwater adhesive Reef Construct, Coral
Construct or hot construct.
4. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved - 08/2019
9