Tccb Models; Eccb Models - FCI ECCB 30 Manual Del Usuario

TCCB MODELS

When cooktop is connected to the electrical supply all
led1 s and digit are lighting to indicate the software
version and proper activation. This operation will turn
off automatically after few second . Now the control
will be ready for the element operations.
Elements setting
Tap "ON/OFF" key: (position 1).
Light indication
Position 12 alt horizontal digit segments light for 10"
(max. time for element setting).
Element selection
Tap "ON/OFF" key: (position 4-7).
Light indication
Position 12 the digit segment of the element setting
will show "0".
Element power selection
Tap "-" or "+" key: (position 10-11).
Light indication
Position 12 the digit segment of the element setting
will show the power selected from "0 to 9".
The element will come on a setting of "4-5" and may
be adjusted up or down by pressing the appropriate
key.
To turn an element OFF tap the ON/ OFF key
(position4) or "-" and "+" key together.
You may turn OFF all active elements at the same
time by tapping ON/OFF key (position 1).
Dual element activation
The dual element consist of two radiant ribbon
elements within the same heating area.
All manuals and user guides at all-guides.com
Models ECCB / TCCB
Either the small (inner element) or both (inner and
outer) elements may be selected for use tap the
"ON/OFF" key (position 4) then tap the dual element
key (position 8 or 13) to activate the outer ring of the
element. t will come on and may be adjusted up or
down by tapping the appropriate key"-"or"+" (position
10-11).
Light indication
Position 9 the led light will show the second zone
activation.
Position 12 power selected "0 to 9".
Hot surface indicator light
Each element has a hot indicator light to show when
the cooking area is hot.
To turn the element OFF, the signal light appear
automatically showing "H" on the digit of the element
selected. The light ("H") remains ON until the cooking
area has cooled to a safe to touch temperature
(approximately 150°F). If a hot surface light is ON use
caution when working around the cooktop as the
cooktop is still hot. The signal "H" blinking when
others elements still working and remain fix when the
cooktop Is OFF.
Lock key (child safety)
When the cook top is OFF tap for few seconds the
lock key (position 2).
Light indication
Position 3 the led light will show the lock key
activation.
All cooktop functions will be disabled.

ECCB MODELS

Control knobs (pos. 1 to 4)
The placement of each knob corresponds to the
placement of the heating element that it controls.
To turn on any element, PUSH DOWN on the knob
and TURN in either direction to desired heat setting.
Element "ON" indicator light (pos. 6)
The element ON indicator light glows whenever any
element is turned on. The light remains lit until all of
the elements are turned OFF
Hot surface indicator light
Each element features a hot indicator light to show
when the cooking area is hot. The signal light will turn
on automatically in the area marked with cross. The
light remains on until the cooking area has cooled to a
safe to touch temperature (approximately 150°F).
If a hot surface light is ON use caution when working
around the cooktop as the cooktop is still hot
Use & Care Manual
ENGLISH
9